Fits Ram 1500 · 5.7 ft Bed (w/o RamBox)
Capser Soft Roll-Up Tonneau Cover — Ram 1500
Reinforced, commercial-grade vinyl on an aluminum frame, built for the Ram 1500’s 5.7 ft (67.4″) bed. Roll the top back for full bed access without removing anything. Comes fully assembled — clamps on, no drilling required.
Shop This CoverOverview
This roll-up cover is built for the Ram 1500’s 5.7 ft (67.4″) bed using reinforced, commercial-grade vinyl on an aluminum frame you can attach to the truck bed without fasteners or drilling. It’s the pick if you don’t need a heavy-duty cover and want the easiest way to open the whole bed for taller items — no removal required, just roll it back.
Sturdy clamps and buckles with straps, plus a latch lock and adjustable tension system at the side rails, keep the cover closed tight against wind and vibration. The vinyl is tear-resistant, water-resistant, and rated for high-temperature exposure.
Fitment note: This cover fits 2009-2023 Ram 1500 (Classic & New Body Style) trucks with a 5.7 ft (67.4″) bed, without the RamBox cargo management system. Both sides are sealed with Velcro strips and the top is secured with a tailgate latch lock system.
Built From
Reinforced Vinyl Top
Tear-resistant, water-resistant vinyl rated for high-temperature exposure and sun protection.
Aluminum Frame
A frame you can attach to the bed rail without fasteners or drilling.
Latch Lock & Tension System
An adjustable tension system at the side rails keeps the cover closed tightly.
Weather Seal Strip
An included seal strip protects the truck bed and cargo from dust, rain, and snow.
Confirming Your Ram 1500’s Fit
Bed length has to match exactly for the frame to tension correctly. This cover is built for the Ram 1500’s 5.7 ft (67.4″) bed — check your bed length on the door jamb sticker or in your owner’s manual before ordering, since Ram 1500 is also sold with a 6.4 ft bed option depending on cab configuration.
How Installation Works
- Position the cover. Since it ships fully assembled, lay the vinyl top and frame across the bed, front edge first.
- Clamp it down. Secure the included clamps at each mounting point by hand — no tools required.
- Adjust the tension. Fine-tune the side rail tension system so the top sits flat with no sag.
- Check the seal. Confirm the weather seal strip compresses evenly along the rail.
- Test the roll. Roll the top open and closed a few times to confirm the latch lock engages cleanly.
Specifications
Why This Cover
- No need to remove the cover to haul taller items — just roll it back
- Tear-resistant, water-resistant vinyl rated for high heat exposure
- Ships fully assembled — no tools, no drilling, no assembly required
- Adjustable tension system keeps the top from sagging or flapping
- Closed profile reduces wind drag compared to an open bed
Frequently Asked Questions
Does this fit both Classic and New Body Style Ram 1500?
Yes, this listing fits both the Classic and New Body Style Ram 1500 with a 5.7 ft bed, model years 2009-2023.
Will this work with the RamBox cargo system?
No — this cover is not compatible with RamBox-equipped Ram trucks. The raised bin lids interfere with the mounting hardware.
Do I need to remove the cover to haul something tall?
No — simply roll the top back toward the cab for full, unobstructed bed access. No removal or storage required for taller loads.
Can I install this by myself?
Yes. The cover ships fully assembled and mounts with included clamps — no tools, no separate assembly step. Most owners complete the install solo in under an hour.
Will the top sag or flap on the highway?
No, as long as the side rail tension system is adjusted correctly during install. A properly tensioned top sits flat and doesn’t flap even at highway speed.
What if a seal or latch wears out?
Seal kits and latch kits are sold separately in our Accessories lineup, so a worn part doesn’t mean replacing the whole cover.
Ready to Cover Your Ram 1500 Bed?
Reinforced vinyl, adjustable tension, no-drill mount — fitted to your exact truck.
Shop This Cover